TCP/IP converter
The Serial Device Server allows the connection of our level converters and dataloggers with RS232C interface to the 10/100 BaseT Ethernet in the easiest way. This allows you to access the M-Bus meters from several PCs on the network. When using our M-Bus dataloggers, it is also possible to read the consumption data via the Internet. An included Windows driver emulates a virtual, serial port on the PC and transfers the data over the network. This allows you to keep on using your serial PC software for communication.
-
Connects serial devices to the Ethernet
-
Converts 10/100 BaseT to RS232
-
Network protocols: TCP/IP, UDP/IP,...
-
RS232: independent of protocol / transparent
-
For M-Bus Level Converters and Centrals
-
Windows driver for virtual COM-Port
-
Go on using your RS232-software
-
Configuration with software or webbrowser
Technical Data
Ethernet connector
10BaseT (RJ45)
Serial connector
RS232C, DB9 plug
1 channel: RX, TX, RTS, CTS, GND
3 channels: Rx1, TX1, RX2, TX2, RX3, TX3
LED displays
2 LED ́s for operating status
1 LED ́s for Ethernetlink
Power Supply
9 .. 18 VDC, 150mA at 12V
Supply voltage range DC
Input Voltage
Input
M-Bus Baudrate
Current at 5V..30V
Terminals Power Supply
Operating temperature
-5 .. 55 °C
Measuring Range
Storage temperature
Measurement Accuracy -20 .. 55°C
Measurement Accuracy -40 .. 55°C
Measurement Accuracy 10 .. 30°C
Measurement Accuracy - 10 .. 10°C
Operating humidity
10-90%, ot condensing
Measuring accuracy humidity 10 to 90% RH
Measuring accuracy humidity 10 to 100% RH
Housing
B x L x H = 48 x 90 x 25 mm
Dimensions (mm)
Dimensions HxWxD
Protection type
Mounting
Wall or DIN rail
Weight
55 g
Order Information
Order Number
Description
TCP001
Serial Device Server with driver software Plug-In power supply, Patch cable and RS232C cable for M-Bus
TCP002
WiFi version of the Serial Device Server
TBA DSUB
Adapter DSub - screwterminals for 3 channel use